 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET PHOTOCOUPLER PS8101 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 5-PIN SOP (SO-5) PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS8101 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. This is a plastic SOP (Small Out-line Package) type for high density applications. FEATURES 1 2 PIN CONNECTION (Top View) 5 4 3 1. Anode 2. Cathode 3. GND 4. VO 5. VCC APPLICATIONS * Computer and peripheral manufactures * General purpose inverter * Substitutions for relays and pulse transformers * Power supply The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10260EJ06V0DS (6th edition) Date Published August 2009 NS Printed in Japan The mark 2003, 2009 The revised points can be easily searched by copying an " PS8101 PACKAGE DIMENSIONS (UNIT: mm) 3.4 5 +0.3 -0.1 4 3 7.00.3 1 2.60.2 2 0.15 +0.10 -0.05 4.4 0.10.1 1.27 0.4 +0.10 -0.05 0.25 M 0.50.3 MARKING EXAMPLE SnBi PLATING Ni/Pd/Au PLATING 8101 N931 No. 1 pin Mark Initial of NEC (Engraved mark) N Type Number Assembly Lot *1 No. 1 pin Mark Initial of NEC (Engraved mark) N 8101 N931 Type Number Assembly Lot *1 N 9 31 N 9 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 Bar : Pb-Free *1 Bar : Pb-Free PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Isolation Distance (MIN.) PS8101 4.2 mm 4.2 mm 0.2 mm 2 Data Sheet PN10260EJ06V0DS PS8101 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS8101 PS8101-F3 PS8101-F4 PS8101-V PS8101-V-F3 PS8101-V-F4 PS8101 PS8101-F3 PS8101-F4 PS8101-V PS8101-V-F3 PS8101-V-F4 PS8101-A PS8101-F3-A PS8101-F4-A PS8101-V-A PS8101-V-F3-A PS8101-V-F4-A PS8101-AX PS8101-F3-AX PS8101-F4-AX PS8101-V-AX PS8101-V-F3-AX PS8101-V-F4-AX 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Pb-Free (Ni/Pd/Au) 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Standard products (UL, CSA approved) Pb-Free (SnBi) 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel Packing Style Safety Standard Approval Standard products (UL, CSA approved) Application Part Number PS8101 *1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current Reverse Voltage Power Dissipation Detector Supply Voltage Output Voltage Output Current Power Dissipation Isolation Voltage *3 *2 *1 Symbol IF VR PD VCC VO IO PC BV TA Tstg Ratings 25 5.0 45 35 35 8.0 100 3 750 -55 to +100 -55 to +125 Unit mA V mW V V mA mW Vr.m.s. C C Operating Ambient Temperature Storage Temperature *1 Reduced to 0.45 mW/C at TA = 25C or more. *2 Reduced to 1.00 mW/C at TA = 25C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together. Data Sheet PN10260EJ06V0DS 3 PS8101 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Forward Voltage Reverse Current Forward Voltage Temperature Coefficient Terminal Capacitance Detector High Level Output Current High Level Output Current Low Level Output Voltage Low Level Supply Current High Level Supply Current Coupled Current Transfer Ratio Isolation Resistance Isolation Capacitance Propagation Delay Time *2 (H L) Propagation Delay Time *2 (L H) *1 Symbol VF IR IF = 16 mA VR = 3 V IF = 16 mA Conditions MIN. TYP. 1.7 MAX. 2.2 10 Unit V A mV/C pF VF/TA Ct IOH (1) IOH (2) VOL ICCL ICCH CTR RI-O CI-O tPHL tPLH CMH -2.1 30 3 500 100 0.1 50 0.01 15 10 11 V = 0 V, f = 1 MHz IF = 0 mA, VCC = VO = 5.5 V IF = 0 mA, VCC = VO = 30 V IF = 16 mA, VCC = 4.5 V, IO = 1.2 mA IF = 16 mA, VO = open, VCC = 30 V IF = 0 mA, VO = open, VCC = 30 V IF = 16 mA, VCC = 4.5 V, VO = 0.4 V VI-O = 1 kVDC, RH = 40 to 60% V = 0 V, f = 1 MHz IF = 16 mA, VCC = 5 V, RL = 2.2 k, CL = 15 pF nA A V 0.4 A 2 35 % 20 0.4 0.5 0.6 0.8 1.2 pF s Common Mode Transient Immunity at *3 High Level Output Common Mode Transient Immunity at *3 Low Level Output IF = 0 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV IF = 16 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV 15 kV/s CML -15 *1 CTR rank K : 20 to 35 (%) N : 15 to 35 (%) 4 Data Sheet PN10260EJ06V0DS PS8101 *2 Test circuit for propagation delay time Pulse input (Pulse width = 100 s, Duty cycle = 1/10) Input (Monitor) 47 tPHL tPLH 0.1 F VCC = 5 V RL = 2.2 k VO (Monitor) CL = 15 pF Input 50% 5V Output 1.5 V VOL CL is approximately 15 pF which includes probe and stray wiring capacitance. *3 Test circuit for common mode transient immunity VCM 90% IF 0.1 F VCC = 5 V RL = 4.1 k VO (Monitor) 10% tr VO (IF = 0 mA) VCM VO (IF = 16 mA) tf 5V 2V 0.8 V VOL 1.5 kV 0V USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10260EJ06V0DS 5 PS8101 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 50 Detector Power Dissipation PC (mW) Diode Power Dissipation PD (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 120 100 80 60 40 20 40 30 20 10 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 TA = +100C +50C +25C 1 000 High Level Output Current IOH (nA) HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE IF = 0 mA Forward Current IF (mA) 10 100 VCC = VO = 30 V VCC = VO = 5.5 V 10 1 0C -25C 0.1 1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.1 -25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Raio CTR 80 70 60 50 40 30 20 10 0 0.5 1 5 10 VCC = 4.5 V, VO = 0.4 V 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 50 Forward Current IF (mA) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 6 Data Sheet PN10260EJ06V0DS PS8101 OUTPUT CURRENT vs. OUTPUT VOLTAGE 10 6 5 IF = 25 mA 6 20 mA 15 mA 4 10 mA 2 5 mA Output Voltage VO (V) OUTPUT VOLTAGE vs. FORWARD CURRENT Output Current IO (mA) 8 4 3 2 1 RL = 2.2 k 5.6 k 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 0 Output Voltage VO (V) Forward Current IF (mA) PROPAGATION DELAY TIME vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH (s) Propagation Delay Time tPHL, tPLH (s) PROPAGATION DELAY TIME vs. LOAD RESISTANCE 10 VCC = 5 V, IF = 16 mA tPLH 3.0 VCC = 5 V, RL = 2.2 k 2.0 1 tPHL tPHL 1.0 tPLH 0 5 10 15 20 25 0.1 1k 10 k Load Resistance RL () 100 k Forward Current IF (mA) Normalized Propagation Delay Time tPHL, tPLH NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 5 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 5 V, RL = 2.2 k 4 3 2 tPLH tPHL 1 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10260EJ06V0DS 7 PS8101 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.05 4.00.1 1.750.1 7.40.1 1.5+0.1 -0 3.45 MAX. 1.550.1 8.00.1 12.00.2 5.50.1 3.90.1 3.00.1 0.30.05 Taping Direction PS8101-F3 PS8101-F4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 3302.0 13.00.2 1001.0 13.51.0 17.51.0 Packing: 2 500 pcs/reel 11.9 to 15.4 Outer edge of flange 8 Data Sheet PN10260EJ06V0DS PS8101 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.45 5.5 1.27 0.8 Data Sheet PN10260EJ06V0DS 9 PS8101 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) * Time (each pins) * Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C 10 Data Sheet PN10260EJ06V0DS PS8101 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between VCC and GND at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10260EJ06V0DS 11 PS8101 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Ris MIN. 10 9 Symbol Speck 55/100/21 Unit UIORM Upr 707 1 061 Vpeak Vpeak Upr 1 326 Vpeak UTR 6 000 2 Vpeak CTI 175 III a Tstg TA -55 to +125 -55 to +100 C C Ris MIN. Ris MIN. 10 10 12 11 Tsi Isi Psi 150 200 300 C mA mW 12 Data Sheet PN10260EJ06V0DS PS8101 * The information in this document is current as of August, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E Data Sheet PN10260EJ06V0DS 13 PS8101 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. |
Price & Availability of PS8101-F3-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |